Jadoo 4Q Firmware Recovery

Written By: The Mariocrafter

Difficulty

Easy

Steps

Time Required

No estimate

Introduction

Follow these steps to recover the firmware on your Jadoo 4Q.

This does not apply to any other Jadoo 4 model, as the Jadoo 4Q is the only Jadoo 4 model to come with a Micro SD card slot.

You'll need a Micro SD card that is 16GB or more (A USB storage device won't work).

Format the Micro SD card with the FAT file system if you haven't already. Notice: formatting will delete all files on the card.

Copy the eight files in the link below to the root of the Micro SD card, not a folder.
Files: https://archive.org/download/update_Jado...

Disconnect the power.
Insert the Micro SD card in the side of the Jadoo box and reconnect the power cable of the Jadoo box. Notice: this will erase all data on the box.

Grab your toothpick and press and hold it firmly into the reset hole for 20-30 seconds.

Please wait for 2-3 minutes. Your Jadoo box will automatically start the recovery.

Now wait for the recovery process to complete (it will take ~7 to 10 minutes). In case of any issue please let us know.

Conclusion

Thank you.

Member since: 16/05/20

1533 Reputation