Introduction

This guide will show you how to remove and replace the keyboard.

  1. qIBagBcRGZMWDgJp
    • Make sure the laptop is unplugged and powered off.

    • Locate the battery latches on the underside of the laptop.

  2. NVN1HUYUFvny4tEG
    • Slide the right latch to the right until you hear it lock into place.

    • Slide the left latch to the left and hold it.

  3. ZJa1quPsoocmGQPL
    • Slide the battery out towards you.

  4. DsNNNulDiuYVIqWq
    • Pry up the thin narrow strip of facing above the keyboard using the opening tool.

  5. 2wlQ3uVdTq1SH3Sw
    • Remove the four screws securing the keyboard using the T4 Torx screwdriver,

    These screws are Phillips, not Torx T4.

    John Beekman -

  6. MkUK4OUWY4fDTJiv
    MkUK4OUWY4fDTJiv
    tMrwH3gBWafhBhYU
    • Lift the keyboard slowly using the opening tool and lean it toward touchpad.

    • It will still be held by the connector ribbon. Make sure not to pull out the connector ribbon.

  7. PclQIhlAOFSv6tGV
    • The ribbon is attached by a white clip. Wedge the white clip up carefully using the spudger. This will release the connector ribbon and you can now remove the keyboard.

    Damaged white locking clip

    cyn lan -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Madeline Park

Member since: 21/09/17

441 Reputation

One comment

I need to know how to change a plasma for a Toshiba Satellite L775D-S7340

Cyndi May Evans -