Introduction
In this tutorial I will tell you how you can disassemble your Ursa Nano 1st gen
Tools
-
-
Okay, so basically you have to peel off this sticker (use hair dryer because otherwise you can damage this sticker).
-
-
-
Now we start the hardest part. You need to push the electronics out through the USB port located at the bottom, using thin tweezers or a needle. (BE CAREFUL IF YOU USE AN ITEM THAT IS TOO THICK, YOU MAY BREAK THE CHARGING PORT)
-
-
-
Congratulations, you've taken apart your inhaler. Now make any necessary repairs and follow the steps in reverse to put it back together
-
