Mazda Guide/Protege 5/Tribute Nozzles

What You Need

  • Tribute Nozzles, part number EC01-67-50YA
  • 10mm deep socket wrench

Removing A Nozzle

  1. Open your hood
  2. Remove the bonnet insulator
  3. Disconnect the hose from the nozzle
  4. Remove the nozzle using the socket wrench from underneath the bonnet

Installing A Nozzle

  1. Connect the hose to the nozzle (through the hole)
  2. Push the nozzle into the hole
  3. Adjust the aim

Images

This article is issued from Wikibooks. The text is available under Creative Commons Attribution-Share Alike 4.0 unless otherwise noted. Additional terms may apply for the media files.