Practical Electronics/T Network

A network consist of three resistors connected like a T

${\displaystyle V=V_{i}{\frac {R_{2}}{R_{2}+R_{1}}}=V_{o}{\frac {R_{2}}{R_{2}+R_{3}}}}$

${\displaystyle V_{o}=V_{i}{\frac {R_{3}+R_{2}}{R_{1}+R_{2}}}}$

${\displaystyle V_{o}=V_{i}{\frac {R_{3}+R_{2}}{R_{1}+R_{2}}}}$

• R₂ = 0

The formula above now becomes

${\displaystyle V_{o}=V_{i}{\frac {R_{3}}{R_{1}}}}$

R₃ > R₁ , V_o > V₁ . This network acts as Voltage Amplifier

R₃ = R₁ , V_o = V₁ . This network acts as Voltage Follower

R₃ < R₁ , V_o < V₁ . This network acts as Voltage Attenuator

• R₃ = 0

The formula above now becomes

${\displaystyle V_{o}=V_{i}{\frac {R_{2}}{R_{2}+R_{1}}}}$

This network acts as Voltage Attenuator

• R₁ = 0

The formula above now becomes

${\displaystyle V_{o}=V_{i}{\frac {R_{3}+R_{2}}{R_{2}}}}$

This network acts as Voltage Amplifier 1 + ${\displaystyle {\frac {R_{3}}{R_{2}}}}$

This network can be used as Voltage Amplifier, Voltage Follower, Voltage Attenuator by choosing the right value for the resistors