Running code after Spring Boot starts

Question

I want to run code after my spring-boot app starts to monitor a directory for changes.

I have tried running a new thread but the @Autowired services have not been set at that point.

I have been able to find ApplicationPreparedEvent, which fires before the @Autowired annotations are set. Ideally I would like the event to fire once the application is ready to process http requests.

Is there a better event to use, or a better way of running code after the application is live in spring-boot?

Answer 1

It is as simple as this:

@EventListener(ApplicationReadyEvent.class)
public void doSomethingAfterStartup() {
    System.out.println("hello world, I have just started up");
}

Tested on version 1.5.1.RELEASE

Answer 2

Try:

@Configuration
@EnableAutoConfiguration
@ComponentScan
public class Application extends SpringBootServletInitializer {

    @SuppressWarnings("resource")
    public static void main(final String[] args) {
        ConfigurableApplicationContext context = SpringApplication.run(Application.class, args);

        context.getBean(Table.class).fillWithTestdata(); // <-- here
    }
}

Answer 3

Have you tried ApplicationReadyEvent?

@Component
public class ApplicationStartup 
implements ApplicationListener<ApplicationReadyEvent> {

  /**
   * This event is executed as late as conceivably possible to indicate that 
   * the application is ready to service requests.
   */
  @Override
  public void onApplicationEvent(final ApplicationReadyEvent event) {

    // here your code ...

    return;
  }
}

Code from: http://blog.netgloo.com/2014/11/13/run-code-at-spring-boot-startup/

This is what the documentation mentions about the startup events:

...

Application events are sent in the following order, as your application runs:

An ApplicationStartedEvent is sent at the start of a run, but before any processing except the registration of listeners and initializers.

An ApplicationEnvironmentPreparedEvent is sent when the Environment to be used in the context is known, but before the context is created.

An ApplicationPreparedEvent is sent just before the refresh is started, but after bean definitions have been loaded.

An ApplicationReadyEvent is sent after the refresh and any related callbacks have been processed to indicate the application is ready to service requests.

An ApplicationFailedEvent is sent if there is an exception on startup.

...

Answer 4

Why not just create a bean that starts your monitor on initialization, something like:

@Component
public class Monitor {
    @Autowired private SomeService service

    @PostConstruct
    public void init(){
        // start your monitoring in here
    }
}

the init method will not be called until any autowiring is done for the bean.

Answer 5

The "Spring Boot" way is to use a CommandLineRunner. Just add beans of that type and you are good to go. In Spring 4.1 (Boot 1.2) there is also a SmartInitializingBean which gets a callback after everything has initialized. And there is SmartLifecycle (from Spring 3).

Answer 6

ApplicationReadyEvent is really only useful if the task you want to perform is not a requirement for correct server operation. Starting an async task to monitor something for changes is a good example.

If, however your server is in a 'not ready' state until the task is completed then it's better to implement SmartInitializingSingleton because you'll get the callback before your REST port has been opened and your server is open for business.

Don't be tempted to use @PostConstruct for tasks that should only happen once ever. You'll get a rude surprise when you notice it being called multiple times...

Answer 7

You can extend a class using ApplicationRunner , override the run() method and add the code there.

import org.springframework.boot.ApplicationRunner;

@Component
public class ServerInitializer implements ApplicationRunner {

    @Override
    public void run(ApplicationArguments applicationArguments) throws Exception {

        //code goes here

    }
}

Answer 8

Use a SmartInitializingSingleton bean in spring > 4.1

@Bean
public SmartInitializingSingleton importProcessor() {
    return () -> {
        doStuff();
    };

}

As alternative a CommandLineRunner bean can be implemented or annotating a bean method with @PostConstruct.

Answer 9

Best way to execute block of code after Spring Boot application started is using PostConstruct annotation.Or also you can use command line runner for the same.

1. Using PostConstruct annotation

@Configuration
public class InitialDataConfiguration {

    @PostConstruct
    public void postConstruct() {
        System.out.println("Started after Spring boot application !");
    }

}

2. Using command line runner bean

@Configuration
public class InitialDataConfiguration {

    @Bean
    CommandLineRunner runner() {
        return args -> {
            System.out.println("CommandLineRunner running in the UnsplashApplication class...");
        };
    }
}

Answer 10

Providing an example for Dave Syer answer, which worked like a charm:

@Component
public class CommandLineAppStartupRunner implements CommandLineRunner {
    private static final Logger logger = LoggerFactory.getLogger(CommandLineAppStartupRunner.class);

    @Override
    public void run(String...args) throws Exception {
        logger.info("Application started with command-line arguments: {} . \n To kill this application, press Ctrl + C.", Arrays.toString(args));
    }
}

Answer 11

I really like the suggestion for usage of the EventListener annotation by @cahen (https://stackoverflow.com/a/44923402/9122660) since it is very clean. Unfortunately I could not get this to work in a Spring + Kotlin setup. What does work for Kotlin is adding the class as a method parameter:

@EventListener 
fun doSomethingAfterStartup(event: ApplicationReadyEvent) {
    System.out.println("hello world, I have just started up");
}

Answer 12

You have several choices:

Using CommandLineRunner or ApplicationRunner as a Bean definition:

Spring Boot executes these towards the end of the application startup process. In most circumstances, the CommandLineRunner will do the job. Following is an example of a CommandLineRunner implementation with Java 8:

@Bean
public CommandLineRunner commandLineRunner() {
   return (args) -> System.out.println("Hello World");
}

Note that the args is the String array of arguments. You can also provide an implementation of this interface and define it as a Spring Component:

@Component
public class MyCommandLineRunner implements CommandLineRunner {

    @Override
    public void run(String... args) throws Exception {
        System.out.println("Hello World");
    }
}

You can use the ApplicationRunner if you need better argument management. ApplicationRunner takes an ApplicationArguments instance that has enhanced argument management options.

You can also order the CommandLineRunner and ApplicationRunner beans using Spring's @Order annotation:

 @Bean
 @Order(1)
 public CommandLineRunner commandLineRunner() {
    return (args) -> System.out.println("Hello World, Order 1");
 }

 @Bean
 @Order(2)
 public CommandLineRunner commandLineRunner() {
    return (args) -> System.out.println("Hello World, Order 2");
 }

Using Spring Boot's ContextRefreshedEvent:

Spring Boot publishes several events at startup. These events indicate the completion of a phase in the application startup process. You can listen to the ContextRefreshedEvent and execute custom code:

@EventListener(ContextRefreshedEvent.class)
public void execute() {
    if(alreadyDone) {
      return;
    }
    System.out.println("hello world");
} 

ContextRefreshedEvent is published several times. Thus, ensure to put a check whether the code execution is already finished.

Answer 13

Try this one and it will run your code when the application context has fully started.

 @Component
public class OnStartServer implements ApplicationListener<ContextRefreshedEvent> {

    @Override
    public void onApplicationEvent(ContextRefreshedEvent arg0) {
                // EXECUTE YOUR CODE HERE 
    }
}

Answer 14

Spring boot provides an ApplicationRunner interface with a run() method to be invoked at application startup. However, instead of raw String arguments passed to the callback method, we have an instance of the ApplicationArguments class.

@Component
public class AppStartupRunner implements ApplicationRunner {

    @Override
    public void run(ApplicationArguments args) throws Exception {
        //some logic here
    }
}

Answer 15

just implement CommandLineRunner for spring boot application. You need to implement run method,

public classs SpringBootApplication implements CommandLineRunner{

    @Override
        public void run(String... arg0) throws Exception {
        // write your logic here 

        }
}

Answer 16

you can use @Component

@RequiredArgsConstructor
@Component
@Slf4j
public class BeerLoader implements CommandLineRunner {
    //declare 

    @Override
    public void run(String... args) throws Exception {
        //some code here 

    }

Answer 17

If you mean running peace of code once after the application started, you can use the CommandLineRunner as below:

@SpringBootApplication
public class SpringBootApplication 
  implements CommandLineRunner {

private static Logger LOG = LoggerFactory
  .getLogger(SpringBootConsoleApplication.class);

public static void main(String[] args) {
    LOG.info("STARTING THE APPLICATION");
    SpringApplication.run(SpringBootConsoleApplication.class, args);
    LOG.info("APPLICATION FINISHED");
}

@Override
public void run(String... args) {
    // enter code you want to run after app loaded here
    LOG.info("EXECUTING : command line runner");

    for (int i = 0; i < args.length; ++i) {
        LOG.info("args[{}]: {}", i, args[i]);
    }
}

}

Otherwise, you can use the DevTools dependency, which help you to run new codes without manually restarting the application.

<dependencies>
    <dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-devtools</artifactId>
    </dependency>
</dependencies>

don't forget to add these codes to your pom.xml to avoid version warnings:

   <properties>
        <java.version>17</java.version>
        <spring-cloud.version>2021.0.3</spring-cloud.version>
    </properties>

 <dependencies>
      <dependency>
        <groupId>org.springframework.cloud</groupId>
        <artifactId>spring-cloud-dependencies</artifactId>
        <version>${spring-cloud.version}</version>
        <type>pom</type>
        <scope>import</scope>
      </dependency>
    </dependencies>

give it a thump up if this was helpful to you!

Answer 18

Best way you use CommandLineRunner or ApplicationRunner The only difference between is run() method CommandLineRunner accepts array of string and ApplicationRunner accepts ApplicationArugument.

Answer 19

I found Andy Brown's answer useful, indicating that SmartInitializingSingleton was better for doing some non-asynchronous task that is required before a successful start.

To give a concrete example, the great book Cloud Native Spring in Action (Manning, 2022) by Thomas Vitale gives the following example on page 122 for loading test data based upon a testdata profile by listening for ApplicationReadyEvent:

@Component
@Profile("testdata")
public class BookDataLoader {
  private final BookRepository bookRepository;

  public BookDataLoader(BookRepository bookRepository) {
    this.bookRepository = bookRepository;
  }

  @EventListener(ApplicationReadyEvent.class)
  public void loadBookTestData() {
    var book1 = new Book("1234567891", "Northern Lights",
        "Lyra Silverstar", 9.90);
    var book2 = new Book("1234567892", "Polar Journey",
        "Iorek Polarson", 12.90);
    bookRepository.save(book1);
    bookRepository.save(book2);
  }
}

Taking Andy Brown's advice, the same functionality could be implemented using SmartInitializingSingleton like this:

@Component
@Profile("testdata")
public class BookDataLoader implements SmartInitializingSingleton {
  private final BookRepository bookRepository;

  public BookDataLoader(BookRepository bookRepository) {
    this.bookRepository = bookRepository;
  }

  @Override
  public void afterSingletonsInstantiated() {
    var book1 = new Book("1234567891", "Northern Lights",
        "Lyra Silverstar", 9.90);
    var book2 = new Book("1234567892", "Polar Journey",
        "Iorek Polarson", 12.90);
    bookRepository.save(book1);
    bookRepository.save(book2);
  }
}

Note that the only differences are 1) implementing SmartInitializingSingleton and 2) overriding afterSingletonsInstantiated() instead of annotating an arbitrary method with @EventListener(ApplicationReadyEvent.class).

This approach is working in my application, and the semantics of SmartInitializingSingleton do seem to be a better fit for data initialization, based upon the Spring documentation and comments in the other answers here.