So I have this older 1TB Toshiba hard drive (P/N MK1059GSM), and it won't finish a Smart Extended Self-Test... The drive seems to work fine in operation, and a short self-test completes normally, but after about 15 minutes of performing an extended self-test GSmartControl says the test aborted manually and the raw output says "Aborted by host". The drive is docked in a Thermaltake Black Widow USB/SATA dual disk dock connected via USB.
What would cause this to exit? It isn't failing the test, just aborting it as if someone pressed cancel... Is this something I should be concerned with?
Output of smartctl -a: http://pastebin.com/QeZ0XEvQ
