5

I just bought a Microsoft Wireless Display adapter and my Windows 10 machine is claiming that my device doesn't support Miracast. Using the guide here, I confirmed that I have NdisVersion 6.4 on my Wifi card and that my display driver has WDDM 2.0. Even the product description for my WiFi card says that it supports WiDi.

My hardware:

  • Nvidia GTX 770M running the latest stable driver
  • Intel i7 4710MQ @ 2.5GHz
  • Intel Duel Band AC 7260 updated to the latest driver

As far as I'm aware, this is all that's required to use Miracast, yet when I go to the action center and select "connect", Windows tells me that "Your device doesn't support Miracast, so it can't be project wirelessly". Am I missing a requirement for Miracast or has Windows gone crazy?

aman207
  • 2,059

4 Answers4

5

Turns out I didn't have my Intel integrated graphics card enabled which is another requirement for Miracast/WiDi. Simply enabling it in the BIOS fixed the issue.

aman207
  • 2,059
4

Apparently, this is a highly generic message which may have more to do with your system's state than with its actual hardware capabilities.

  • In my case, the cause was just that I had turned my laptop's wi-fi off, since I use Ethernet at home (plugged into the wi-fi router, but that's not good enough).
  • Others have mentioned enabling and updating one's graphics drivers.

(An hour later, the silver lining of this very poorly written message is that I've now got both of my graphics drivers up to date!)

1

Windows 10 only supports WiDi/Miracast through a compatible dongle or Intel graphics chipset so make sure you have your Intel graphics hardware enabled and the latest drivers installed, as the drivers that originally came with your device may not support WiDi/Miracast.

carlin.scott
  • 158
  • 1
  • 8
0

So far I have tried all the solutions online and answers here, but none worked (nor I didn't find any "Intel integrated graphics" in BIOS setting); confirmed all the system/display/wifi settings that are capable to support Miracast Technology; what I did was to

  • turn off the "Airplane" mode

Note: I'm keeping my system always on Airplane mode enabled and I do enable/disable other devices separately when Airplane mode is on.