0

I'm trying to install Debian Stretch on a single board computer Olimex Lime2.

I tried the official images (both netinst and CD1) available here: https://cdimage.debian.org/debian-cd/current/armhf/iso-cd/

It didn't even boot.

Then, I used those instructions: https://www.debian.org/releases/stable/armhf/ch05s01.en.html

I tried those ones, it started the kernel and got stuck, complaining "* warning - bad CRC, using default environment", "could not initialize PHY ethernet@01c50000", "* ERROR: serverip not set", "missing environment variable: pxeuuid", "missing environment variable: bootfile", "Config file not found" and "Unhandled DHCP Option in OFFER/ACK: 125": http://http.us.debian.org/debian/dists/stretch/main/installer-armhf/current/images/u-boot/A20-OLinuXino-Lime2/

http://http.us.debian.org/debian/dists/stretch/main/installer-armhf/current/images/hd-media/SD-card-images/

http://http.us.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/

Olimex provides a working image of Debian Jessie but the kernel is too old (3.4).

I wonder whether there is something wrong in the official images provided by Debian. Moreover, my problem with "bootfile" looks like this one: https://github.com/armbian/build/issues/319

I'm currently running out of options. What can I do to install Debian Stretch on this machine? I already tried to migrate from Debian Jessie to Debian Stretch by using the image provided by Olimex but it broke the X server (not very important) and as the kernel was still too old, I had tons of troubles with systemd. By the way, I'd prefer using an official image provided by the Debian community.

music2myear
  • 49,799
gouessej
  • 101

2 Answers2

0

I haven't tried it myself on the LIME2, but, depending on the purpose of your board, a simple option is to install FreedomBox. They provide an LIME2-ready image that you can download here. FreedomBox it is a Debian Pure Blend (based on Stretch), so you can remove any FreedomBox-specific packages to have a more "vanilla" Debian instead.

topodelapradera
  • 1
0

»Could not initialize PHY ethernet@01c50000« on sunxi-boards is a feature since major release 2017.05 (i got to know it @ u-boot-sunxi-custodian-next-linksprite_pcduino-20170404T124211).

Use 2017.01, test a complete image, or extract only the u-boot to your sd-card, dhcp & tftp are friends ;-) Look here https://dl.armbian.com/lime2/archive/

Older u-boot only: http://dl.linux-sunxi.org/nightly/u-boot-sunxi/u-boot-sunxi-custodian-next/u-boot-sunxi-custodian-next-20160829T174209-aa8e17b/u-boot-sunxi-custodian-next-a20-olinuxino-lime2.tar.xz

Net Worker
  • 1