1

I am trying to get Dynojet Power Commander V (PCV) software functioning in Wine 4.0 and 18.2x64. The program starts fine, but it cannot find the controller which is connected via USB as a HID. It works in VirtualBox (Windows 7), but that is bulky for what I'm trying to do.

I entered the registry key in https://wiki.winehq.org/Hid and many other things that didn't work. The Wine debug log just says it couldn't find the controller, nothing useful. There is no option in the PCV software that directs the connection.

It just uses the generic Windows HID driver.

$ dmesg

[17133.472348] usb 3-3: new full-speed USB device number 8 using xhci_hcd [17133.622299] usb 3-3: New USB device found, idVendor=10b6, idProduct=0502 [17133.622303] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [17133.622306] usb 3-3: Product: Power Commander 5 [17133.622308] usb 3-3: Manufacturer: Dynojet Research, Inc. [17133.623766] hid-generic 0003:10B6:0502.0006: hiddev1,hidraw1: USB HID v2.00 Device [Dynojet Research, Inc. Power Commander 5] on usb-0000:00:14.0-3/input0

$ lsusb

Bus 002 Device 005: ID 1770:ff00

$ sudo lsusb -v -d 10b6:0502

Bus 003 Device 004: ID 10b6:0502 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x10b6 idProduct 0x0502 bcdDevice 0.00 iManufacturer 1 Dynojet Research, Inc. iProduct 2 Power Commander 5 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 2.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 37 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Status: 0x0000 (Bus Powered)

0 Answers0