I have a good one for you guys. Here is my setup:
- EVGA x58 Classified Motherboard (LGA1366)
- Intel Core i7 920 @2.67 Ghz (45nm)
My issue is: I cannot get 64 bit virtual machines setup. Virtual Box shows only 32 bit options.
NOTE: This used to work, but no longer after reset & re-install of Windows 10.
This is what I've done to troubleshoot:
- BIOS Main Menu--> Frequency/Voltage control--> CPU Feature--> Virtualization Technology(Enabled this)
- Made sure Hyper-V is not installed.
- Triple-checked Core i7 920 specs to make sure Virtualization is supported: https://ark.intel.com/content/www/us/en/ark/products/37147/intel-core-i7-920-processor-8m-cache-2-66-ghz-4-80-gt-s-intel-qpi.html
- Downloaded the Intel Processor Identification Utility - which tells me that Virtualization Technology isn't supported... ??? (See Figure 1 below)
- Core isolation/memory integrity is turned off.
- I've fully shut down the computer and started it again rather than only using restarts after enabling Virtualization in the BIOS.
- I have the most recent version of Windows 10 (as of 5/20/2019)
- I have uninstalled Avast and all virus scanners/firewalls, and have a very bare-bones system with no obvious software which would restrict virtualization settings.
Figure 1: (click it for image) Core i7 920 identification utility
So... what I've tried covers all suggestions I can find online including the link and links of the link that the moderator posted above :(, and I've been trying for a couple days.
Any ideas folks?
