5

Is it possible to string Ethernet male-to-female cables?

I have a cable I need to extend, but it's in the wall, so I can't just replace it with a longer one. It has no connectors yet, so I'm thinking I could fit one end with female, making it a male/female cable. Into this I would plug in the extending male/male cable. Will this work?

I know about Ethernet couplers, and that's certainly an option, but I'm considering the alternative, since I have yet to crimp on the connectors.

Pylsa
  • 31,383
sferencik
  • 193

3 Answers3

4

Absolutely. This will work.

You just need to match the wiring at both ends, so T568A or T568B.

Mr Ethernet
  • 4,459
3

You are talking about a splice and yes your male female ending will work but keep in mind each one is a point of fail and source to add noise to the line. Make sure you keep the color codes correct and standard. Putting a splice in like that is not a proper code approved cable run so if that is an issue you might want to look at my next suggestion. Another solution would be to use the already run line as a line to pull a new longer single cable through the conduit if possible.

Lunas Eclipse
  • 31
0

I know about Ethernet couplers, and that's certainly an option, but I'm considering >the alternative, since I have yet to crimp on the connectors.

Not sure why you think you would need to crimp the cables...I have seen ethernet female-to-female couplers so all you would need is another ethernet cable. Of course, not the most elegant way of doing it but this will get you going as long as you are within the ethernet range limits.

gdesilva
  • 1