3

So I've been struggling with this issue for quite a while. At first I thought it was a combination of DisplayPort and an HDMI monitor, but now that I have 2 monitors with a DisplayPort the issue persists.

My situation: I have 2 monitors. One is an AOC 24G1WG4, the other is my new LG 27GL83A-B and I'm running it as an extended setup.

As my primary monitor I have my LG and so my secondary monitor is the AOC. I have disabled the option that the taskbar is at all my monitors because I would only show the taskbar on my secondary monitor. When I unlock the taskbar and drag it to the secondary monitor and lock it again it stays there as long as I don't turn off the power for my monitors.

That being said when I switch off my monitors and turn it on again my taskbar gets moved to the primary monitor and it's still locked.

Now I have read various things, one reason could be because the LG is switching on quicker and so it becomes the primary another could be because of inactive devices.

I have tried a few open source tools to "fix" this issue, but to no avail. I'm wondering if anyone has had this issue and if there is a solution by now?

Looking forward to some tips to solve this issue as it's driving me insane :(

FaithlessDbo
  • 31
  • 3

1 Answers1

3

According to your description, it seems that your problem is mostly with DisplayPort. DisplayPort under Windows is implemented as a PNP device, differently than VGA and DVI, in that when the monitor enters the sleep state Windows treats it as if it were removed, even displacing its displayed windows to other monitors. When the monitor wakes up, Windows treats it as a new device being discovered. This behavior might be the cause of your problems.

Whenever you turn off the secondary monitor, Windows will move everything to the primary monitor. It doesn't matter here if the primary monitor is on or off.

If you can move the secondary monitor to DVI, this might be one solution.

Another solution which will prevent Windows from verifying the continued presence of the DisplayPort monitors is to keep the EDID properties of the DisplayPort monitors.

For this solution see these answers of mine :

harrymc
  • 498,455