2

I tried to revert back to the 21st of August, but Windows gets stuck in an endless loop after boot. So the revert back never happens.

Before this major update my laptop computer was smooth and fine, and also had no 100% HD usage in Task Manager. I've tried all the things that are suggested online: MSISupported=0, driver updates and so on. Even tried some old drivers without any luck.

Chromium is new after update, and Google Chrome is very slow.

What I have done, during my attempt to get no 100% disk usage:

  • Updated AHCI Controller to iaStorA.sys, Intel Graphics driver, GEForce driver
  • Disabled WSearch, Superfetch and Prefetch services. And some other services like Adobe Acrobat update, NVIDIA Telemetry Container, App Readiness, MonectServerService, Telephony, ouch Keyboard and Handwriting Panel Service++
  • I've disabled Windows Update.
  • I've installed new Toshiba drivers for my laptop HDD.
  • Runned Glarysofts Defrag a dozen of times.
  • Disabled boot slowdowns (in msconfig).
  • I've fixed heating problems by buying a usb-fan.
  • Improved Google Chromes Performance by enabling hardware acceleration for videos (youtube, twitch etc).
  • Runned CCleaner a dozen of times.

Anyone else had this problem after the August update and anyone managed to fix it? And if so, what are the steps?

My PC & Windows specs:

  • Acer Aspire E1-571G

    • Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz 2.59GHz
    • RAM 4,00 GB
    • 64-bit OS, x64 based processor
    • Toshiba MQ01ABD075
    • Intel(R) 7 Series Chipset Family SATA AHCI Controller
    • Intel(R) HD Graphics 4000
    • NVIDIA GeForce 710M

  • Windows version

    • Windows 10 Home
    • Version 2004 (OS-build 10.0.19041.421)

Edit: I've also tried to uninstall the latest Windows Updates: KB. From Control Panel->Add remove programs. Some updates are even uninstallable. I've also gotten several Bluescreens the last few days. I fixed it by a command prompt fix.

Natural Number Guy
  • 153

1 Answers1

0

A fresh install did the trick. I made a bootable usb stick using the Create Windows 10 Media tool. I used the option to delete all Windows files and create a fresh install of Windows. The problem with this option is that you need to have a backup computer or some device that can access the internet, download the tool and make the bootable usb stick. If you don't have that then you could ask a friend do it for you or ask if some repair shop can do it. I wouldnt have been able to do it without the old laptop I had lying around. For Home users, currently the latest version of Windows is 10.0.19041 Build 19041 this should work pretty good.

There is no need to change the Standard SATA AHCI-controller driver if you have an HDD. Basically what I have is the storahci.sys driver, and I needed not change this after fresh install.

It seemed to me that; all the updates during the past two years or so over the older Windows Home version may have caused 100% diskusage, perhaps due to conflicts or poor drivercode. After fresh install I do not have any issues either with RAM or CPU or disk usage anymore. The latest version of Windows seem to have fixed these problems.

Basically I did not need to do any of these things:

  • MSISupported
  • Standard SATA AHCI-controller driver
  • Disable AntiVirus program
  • Disable Services and Startup services or change any of these
  • Turn of indexing
  • Update the graphics drivers (even though this is prefered I didnt have to do it yet)
  • Change number of processors for fast boot
  • Change anything in the registry
  • Do DISM /Online...
  • Do sfc /scannow

Windows is booting faster than ever and there is no 100% disk usage anymore. One last notice: I did update the BIOS firmware on the older version of Windows before it stalled and I had to do a fresh install. And Chrome is also using lesser RAM at the moment. I have no idea if there was a virus in the older version of Windows 10 or if there was some bottleneck issue in some of the older drivers.

Natural Number Guy
  • 153