MacBook Pro (early 2011) has a white screen problem. I booted it with Windows 10 USB installer and formatted the HDD completely. It works fine (I haven't installed any driver yet), but it stuck at white screen during installing macOS with USB (after loading bar). It seems there is no hardware failure because Windows can boot itself, but still I cannot figure that what's the problem with macOS.
Asked
Active
Viewed 295 times
1 Answers
0
You need to tell the mac to boot from USB again. Make sure you have a USB install, and verify it on another mac if possible. If you know your install media works, insert the USB drive and hold down option whilst powering on, and keep holding until you see the boot selection screen. Select the USB device to begin reinstall
JohnnyVegas
- 3,554
- 1
- 17
- 20