My 128GB SSD is configured in RAID1. According to the technical specs it has 100TBW. Total host writes is now more then 150 000GB. The filesystem is getting corrupted all the time.
I think this SSD is not designed for such write output. Average 6MB/s , 24/7. Temporary camera images that are deleted after verification.
Should I switch to a more high end and larger SSD?
Your disk SMART report shows no errors. The 100 values may be confusing,
but they are normalized values that actually mean "no error".
The disk seems to be in perfect health, although it shows that it was heavily used. The Total Host Writes number is not a reliable parameter (I have seen other cases where the number was clearly nonsense). The disk's rating of 100TBW doesn't mean that it can't do much more - it is after all an enterprise-grade disk.
From these SMART values, I see no fault in the disk that can explain its file-system being corrupted. I doubt that the problem is with the disk.
If you have no confidence in the disk, you may replace it, but the decision is up to you.
