0

I am currently setting up cameras for my workplace. They want me to install leftover generation 1 Aircam's, which they have been sitting for about 10 years.

Sounds easy, right? For some reason it is not going well for me. I've changed the subnet of my internet card to match the subnet of the camera's default IP address, and I am unable to access the web IP page. I've tried different cables and ports on my PoE switch. Here is all the debugging I have down so far below. If you need any more screenshots please ask, I won't hesitate to post more information. I am very stumped, people.

You can see here that my camera is connected and on the network with the IP at 192.168.1.20. My Blue Iris machine (my pc) has an IP address of 192.168.1.21

My IP address & I pinged the camera for troubleshooting

One thing to note is that when I am not on the same subnet, it instantly directs me to this error page. When I am on the same subnet, this page will load for a minute before showing this error.

My setup. A computer, PoE switch, injector, and camera. The injector is needed because the camera is passive PoE @ 24V whereas the PoE switch as active PoE @ 48V.

Kenan Velagic
  • 1

0 Answers0