95

I want a simple way to show all the TCP data (not the TCP headers or anything else) going over any interface on my Linux box.

For instance, I want a magical command that if I do:

magic_commmand_I_want port=1234

then if there was a server listening on port 1234 on my machine, and someone did:

echo hello | nc localhost 1234
# Note: "nc" (aka "netcat") is a simple tool that sends data to a host/port

Then the magical command would just print out:

hello

I've tried "tcpdump", "ethereal", "tethereal", "tshark", and others, but it isn't obvious how you get them to:

  • not show IP addresses or other metadata
  • only show the "data" being sent, not individual packets and their headers
  • print the data as-is, not in hex, and not with packet-offset markers
  • sniff all network traffic (whether it's on eth0 or eth1 or lo, etc...)

Yes, you could probably string together a piped set of unix commands to do this, but that isn't very easy to remember for next time :)

If you have a simple example of an exact command-line that does this, that's what I'd like.

Dustin Boswell
  • 2,651

7 Answers7

122

Update:

As pointed by Michal in the comments: From tcpflow version 1.3 the -e option is used for specifying the scanner name. So the error "Invalid scanner name '8983'" is printed. The correct command is

sudo tcpflow -i any -C -J port 1234

(also -J has been changed to -g in the latest release)

Thanks to yves for pointing me to "tcpflow". Here's the commmand-line:

tcpflow -i any -C -e port 1234  # as root, or with sudo

This does everything I want

  • displays the data byte-for-byte as it comes in
  • doesn't display any other metadata
  • listens on all interfaces (so it captures data coming from within the machine and outside)

The "-C" tells it to dump to the console instead of a file. The "-e" enables colors so client->server and server->client are visually distinct.

I installed tcpflow by simply doing

sudo apt-get install tcpflow
Sridhar Sarnobat
  • 1,552
Dustin Boswell
  • 2,651
36

socat is the tool you are asking for. It can act as a proxy:

$socat -v TCP-LISTEN:4444 TCP:localhost:1234
hello

then your application must connect port 4444 instead of directly connect to 1234

-v option is for socat to print out everything it receives on the standard error (stderr).

Update:

If socat is not available on your machine, you may still emulate it that way with netcat:

$netcat -l -p 4444 | tee output_file | netcat localhost 1234

caveats: this option is unidirectional. the second netcat instance will print any reponse from your server to the standard output. You may still do then:

$mkfifo my_fifo
$netcat -l -p 4444 < my_fifo | tee output_file | netcat localhost 1234 > my_fifo
user857990
  • 169
yves Baumes
  • 457
19

Try Wireshark. It's an excellent protocol analyser targeted for both Linux and Windows.

Peter Mortensen
  • 12,326
Kevin Boyd
  • 1,331
14

tcpflow is what you want. Extract from the man page:

DESCRIPTION
tcpflow is a program that captures data transmitted as part of TCP connections (flows), and stores the data in a way that is convenient for protocol analysis or debugging. A program like tcpdump(4) shows a summary of packets seen on the wire, but usually doesn't store the data that's actually being transmitted. In contrast, tcpflow reconstructs the actual data streams and stores each flow in a separate file for later analysis. tcpflow understands TCP sequence numbers and will correctly reconstruct data streams regardless of retransmissions or out-of-order delivery.

tcpflow stores all captured data in files that have names of the form

192.168.101.102.02345-010.011.012.013.45103

where the contents of the above file would be data transmitted from host 192.168.101.102 port 2345, to host 10.11.12.13 port 45103.

Set up a connection from your application app to your server. When the connection is up and running, tcpflow is still able to capturs data from it For exemple: 

$ sudo tcpflow -i lo port 5555
tcpflow[3006]: listening on lo

Every data will be stored in a file named 127.000.000.001.48842-127.000.000.001.05555.

You may still redirect this on the standard output with the option -Cs . Read the manual page to play with expression to tune the paquets you want tcpflow to capture.

yves Baumes
  • 457
4

ngrep is very nice for this. It takes a BPF string and an optional string to search for within the packets, and then dumps the packet contents to screen in a pretty useful format. It optionally also dumps to a pcap_dump file that you can examine more closely in Wireshark later.

hobbs
  • 1,492
0

Take a look at Chaosreader. Though it does a bit more than you ask for and slightly differently, probably you could modify the code of it to do what you want.

Andrew Y
  • 101
-1

Maybe you can write a wrapper for tcpdump, for example, which will remove all redundant information

dimba
  • 803