21

I am trying to extract "exactly 1 frame of every 10" frames of a video (i.e. extract 1 , leave 9 then repeat) for scientific purposes. The video is 105 frames, 3.5 seconds, 29.97fps (h.264, .mov, produced by Nikon D3100).

I have uploaded it here.

VLC

Below command should produce 10 frames, but it only produces 6 images. I tried different scene ratios and neither of them produce correct number of frames (not even near to correct).

vlc 1.mov --video-filter=scene --vout=dummy --scene-ratio=10 --scene-prefix=img- --scene-path=. vlc://quit

Would someone please tell me what is the problem?

FFmpeg

FFmpeg does not seem to have a command exactly for my purpose. Below command extracts 3 frames out of every second, but since the FPS is not exactly 30 (rather 2.97), that will not produce correct results for me.

In addition even FFmpeg does not give out correct number of frames with even this command. For 3.5 seconds of video I expect at most 10 frames, but what I get is 12 frames!

ffmpeg -i 1.mov -y -an -sameq  -r 3 -f image2 -vcodec mjpeg %03d.jpg

How can I achieve what I want?

slhck
  • 235,242
wmac
  • 1,487

3 Answers3

39

Select 1 frame out of every 10 frames

You can use the select video filter in ffmpeg to do this:

ffmpeg -i input.mov -vf "select=not(mod(n\,10))" -vsync vfr -q:v 2 img_%03d.jpg

  • For JPG output you can vary quality with -q:v. Effective range is 2 (best quality) to 31 (worst quality). You don't need this option if you want to output to PNG instead.

  • This will output img_001.jpg, img_002.jpg, img_003.jpg, etc.

mwfearnley
  • 7,889
llogan
  • 63,280
4

The most important aspect in your question is the fact that the video uses 29.97 frames per second, not 30. Pesky NTSC.

Anyway, I think it would be easiest to just extract every frame, and then remove the ones you don't need:

ffmpeg -i 1.mov -y -f image2 -c:v mjpeg %03d.jpg

Then, remove the ones you don't need. Since every tenth frame will end with a 1.jpg, we can just take all the others …

find . -maxdepth 1 -not -iname "*1.jpg"

… and once you're sure these are the ones you want to remove:

find . -maxdepth 1 -not -iname "*1.jpg" -exec rm '{}' \;

If you can use mencoder, you could try the framestep option, as explained in the documentation, like framestep=10 in your case. I personally couldn't install/try it though.

slhck
  • 235,242
0

If you were to first convert the video to a series of raw rgb24 or rgb32 images possibly then you might be able to get the right number of frames since in original form there seems to include unusual frame types that may not be images at all ???

In the original Laser Discs the entire video was composed of a series of images with individual frame numbers 1 to 100,000 or more, and like that is really the correct way to establish a baseline for future conversions or manipulations.

The industry has changed to this strange compression idea simply to reduce monies outlaid and to corrupt true scientific forms of handling numbers.

You must first extract any audio as a wave file so as not to lose audio entirely. It seems FFMPEG puts identifying info in each extracted image, because if you try to string images together from ones just extracted, and you mix other images from other sources with same extension, ffmpeg will ignore the images you tried to piece into the middle of everything.

With the laser disc format, the frame rate is simply dictated by whatever rate you present the sequential images and not controlled in any way by the images themselves.

FFMPEG might take a lesson from science instead of art for proper handling and display of images of any kind. Or possibly the entire AV industry itself. The industry really needs to improve capabilities of the hardware and use raw data which requires lots of memory/storage. Nothing beats raw data for precision and accuracy.

mwfearnley
  • 7,889
Aluetta
  • 11