2

I seem to be experiencing a weird problem with the front headphone jack of my pc.

It was working fine yesterday until i tripped while have my earphones on which disconnected the jack very roughly.

The problem is that when i fully insert the jack into the hole until it holds perfectly i only hear sound on one side (kinda like a sound balance). If i insert it half way through everything will be back to normal, but this way the cable is loose and any agitation will disconnect it very easily

I tried a few tests, earphones are fine and work well on other pcs. Any headset also reproduces the same problem when connected to the front panel, but not the back panel.

Any ideas what i might have done? and how i can fix it ?

Thanks in advance, your help is very much appreciated

PS: I tried digging in the case but i can't get to the front panel from the inside without disconnecting everything so i'm avoiding that for now.

Dany Khalife
  • 187

1 Answers1

5

What probably happened when the plug was yanked out was that one of the connectors came loose/moved. You may be able to fix that, but it's quite unlikely. Your best bet is probably to replace that headphone jack (since it's the front panel that might not be too hard).

Headphone jack
Ignore the microphone part, that's irrelevant to you.

imtheman
  • 4,783