HI, i was wondering if there is a temporary way, to turn off the my GA-81845GV motherboard, so that pressing the power button makes it appear that the MB is faulty. is there a jumper setting to do so? thanks!
Asked
Active
Viewed 399 times
3 Answers
1
You could leave the CLR CMOS header (if there is one) in the CLR CMOS mode. Some motherboards won't come up when their VBAT is shorted to GND and it doesn't potentially do any damage to the motherboard other than clear the BIOS settings.
hanleyp
- 6,625
0
Put the jumpers on backwards
0
- Unplug the memory sticks -- this will cause the BIOS beeps
- If you think that will be a giveaway,
- also unplug the default speaker
- If you think that will be a giveaway,
nik
- 57,042