Has anybody successfully gotten Hamachi working on a Linux server working as a gateway? Any help getting that setup?
I'm in a dorm room (so I am pretty much forced to use Hamachi instead of OpenVPN) and I have a router in my room setup with my desktop, a RaspberryPi, and a few network devices (printer and a NAS.) I'd like to setup Hamachi on the Pi to serve as a gateway into my dorm network so I could access the devices elsewhere.
I have Hamachi installed on the Pi (running Debian,) but when I use the Hamachi web site to setup a Gateway network between my RaspberryPi and Laptop, it just doesn't want to work. The Hamachi client on my laptop shows the Pi having address "0.0.0.0" and I can't ping the Pi pr access any of the network resources.
Here are the results of ifconfig on the Pi:
eth0 Link encap:Ethernet HWaddr b8:27:eb:c8:ce:e0
inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::ba27:ebff:fec8:cee0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1584 errors:0 dropped:0 overruns:0 frame:0
TX packets:950 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:207635 (202.7 KiB) TX bytes:121937 (119.0 KiB)
ham0 Link encap:Ethernet HWaddr 7a:79:05:0b:32:bc
inet addr:5.11.50.188 Bcast:5.255.255.255 Mask:255.0.0.0
inet6 addr: 2620:9b::50b:32bc/96 Scope:Global
inet6 addr: fe80::7879:5ff:fe0b:32bc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1
RX packets:647 errors:0 dropped:0 overruns:0 frame:0
TX packets:85 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:100175 (97.8 KiB) TX bytes:11832 (11.5 KiB)
ham1 Link encap:Ethernet HWaddr 00:23:c3:0b:32:bc
inet6 addr: fe80::223:c3ff:fe0b:32bc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1
RX packets:22 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:1320 (1.2 KiB) TX bytes:468 (468.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- eth0 is the interface to my network.
- ham0 is the interface Hamachi permanently has connected. This is present before the Pi is a member of any Hamachi network.
- ham1 is the interface that appeared when I created the Hamachi Gateway network.
- lo - Loopback
Here's what's in the routing table:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
5.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 ham0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
Any help would be greatly appreciated.
