i have been trying to connect 3g modem on arm9 board. bot modem is not getting detected. here is my lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 12d1:14fe Huawei Technologies Co., Ltd.
and my dmesg is giving something like dis:
scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
scsi 6:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg0 type 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] Attached SCSI removable disk
scsi 5:0:0:0: rejecting I/O to dead device
i have installed usb_modeswitch for arm. when i run usb modeswitch command: usb_modeswitch -c /etc/usb_modeswitch.conf -v 0x12d1 -p 0x14fe -W
Warning: TargetProductList overrides TargetProduct!
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.4 (C) Josua Dietze 2010
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x14fe
TargetVendor= 0x12d1
TargetProduct= not set
TargetClass= not set
TargetProductList="14fe,1506"
DetachStorageOnly=0
HuaweiMode=1
SierraMode=0
SonyMode=0
GCTMode=0
MessageEndpoint= not set
MessageContent=""
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check disabled
System integration mode disabled
Looking for target devices ...
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID from list
Found devices in target mode or class (1)
Looking for default devices ...
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID
adding device
Found devices in default mode or class (1)
Accessing device 004 on bus 002 ...
Using endpoints 0x01 (out) and 0x81 (in)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("dummy")
OK, driver "dummy" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Sending Huawei control message ...
OK, Huawei control message sent
-> Run lsusb to note any changes. Bye.
root@arago:/etc/udev/rules.d# scsi 5:0:0:0: rejecting I/O to dead device
so wen again i run lsusb command:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 12d1:14fe Huawei Technologies Co., Ltd.
usb is detecting as mass storage. and it is not detecting as modem.
usb_modeswitch.conf
DisableSwitching=0
# Enable logging (results in a extensive report file in /var/log, named
# "usb_modeswitch_<interface-name>"
EnableLogging=1
DefaultVendor = 0x12d1
DefaultProduct = 0x1506
MessageEndPoint = "0x01"
iMessageContent = "55534243000000000000000000000011060000000000000000 0000000000
TargetVendor = 0x12d1
TargetProductList="14fe,1506"
HuaweiMode = 1
do i need to write any rules for usb_modeswitch? there is no rule files in my /lib/udev and there are some files in /etc/udev/rules.d.
why my 3g dongle is getting detected as massstorage not as modem? what else i need to do? please help me asap.
