0

Having a bit of a nightmare after upgrading to 8.1 - the fan is constantly on maximum.

This question and other sources around the net suggest upgrading the AMD driver.

I have upgraded both the graphics drivers as far as I can:

AMD Radeon HD 7600M - v13.150.102.0 Intel HD Graphics 4000 - v10.18.10.3316

and I am still having the issue.

I'm at a lost as to what to do now! Any help would be greatly appreciated.

Update

Upgrading the AMD Radeon HD 7600M Series driver to 13.152.1.1000 seems to have fixed the issue on startup - however, putting the laptop to sleep and resuming causes the fan to go full speed at all times again.

Additionally I disabled the Discrete Graphics (e.g. the Radeon) in BIOS and this issue still occurs.

SpeedFan does not show the fan so it cannot be adjusted that way.

There are no fan settings in BIOS setup.

Another update

I have found this only occurs when waking from sleep - waking from hibernate does not result in high fan speeds... I wonder if this narrows down any debugging of this issue?

Another another update

I used psshutdown -d -t 0 to put the laptop to sleep whilst in Safe Mode and the issue still occurs.

Community
  • 1
dav_i
  • 173

6 Answers6

2

I would recommend taking the following steps:

Check Temps

  • Download, install, and run HWMonitor 1.23 Setup
  • Close all web browsers, itunes, movies, programs, games, etc...
  • It should tell you the temperatures of your CPU and both GPUs
  • If the CPU and HD4000 is at or below 55 Celsius then you are good
  • If the 7600M is at or below 60 Celsius then you are good
  • If both temps are good then BIOS fan profile might have been set to maximum
  • If CPU temp is high then check if task manager (Ctrl + Shift + Esc) reports the CPU at a high percentage
    • If consistently between 50 at 100% for 5 minutes straght then kill the process causing the high CPU load
  • If GPU temp is high
    • Download, install, and run GPU-z
    • In the Sensors check if GPU load is high (20% - 100%
    • If it is high then something went haywire because it should only show activity when doing something visually demanding like watching movies, videos, drawing in CAD, or playing games.

Check BIOS

  • Restart your machine and get into BIOS by pressing F2 or F10 or whatever it may be
  • Snoop around for any sort of fan controls
  • Is it set to "aggressive" or "100%" or "10,000 rpm" or anything crazy like that?
  • Change fan setting to lower setting/RPM

Last Resort

  • Get SpeedFan and mess around with fan settings (it might work or might not work)

Please let me know how this goes for you.

MonkeyZeus
  • 9,841
0

I got in contact with Sony Support and they pointed me to this driver update:

Graphics Driver (AMD) - Fix Windows Hardware Certification Kit (WHCK) crash test

Works like a charm. Regret not going to them in the first place!

Community
  • 1
dav_i
  • 173
0

My Sony Z series have the same problem after updating to Windows 8.1 too, I would recommend to fix by 1. Update graphic driver for each Sony model. 2. Update Vaio control center 3. Launch Vaio control center, click at the power and battery section, then set silence mode at the cooling and performance section.

Somsak Hoon.
  • 1
0

i just disabled the Intel(R) HD Graphics 4000 and after 3-4 minutes it stopped

miniman
  • 1
0

What worked for me was installing AMD Catalyst suite: http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64

Chris
  • 1
-1

I updated Intel Graphics 4000 from Intel site and after restarting it stopped.

user276847
  • 1