My separated graphics card broke so I want to enable on-board graphics. Problem is I can't do anything in the Bios because my monitor has no signal. What should I do?
Asked
Active
Viewed 6,609 times
2 Answers
3
Remove the broken card.
When the case is open anyway find the "CMOS clear" jumper.
Use it to reset the bios configuration to default (see the manual of the motherboard for instructions).
This should re-enable the on-board graphics, even if it was disabled previously.
Tonny
- 33,276
0
- Borrow a second separated graphics card (a working one).
- Next enter the BIOS (now visible due to the working card). Enable on-board graphics as primary.
- Shutdown, remove the borrowed card and boot from the system.
- Boot using the configuration you set in the second step.
Very easy, but assuming you can borrow a second card.
Hennes
- 65,804
- 7
- 115
- 169