I have a graphics-intensive 4"x6" label I'm printing to the ZT230. I'm printing multiple (10) copies.
When connected via USB, all goes well. However, when connected via wifi, I only get 2 of the labels.
A wireshark capture shows that at some point in the process my computer (presumably my windows spooler) is sending a reset packet, which, I believe, would pretty much kill the print job.
I'm getting the same results on Win8, Win7 and WinXP.
The print job was originally generated on Zebra's ZebraDesigner2 software. For easier diagnosis, I captured it to a .prn file.
The .prn file can be found here: https://drive.google.com/file/d/0BwxF_9SAkKzLLTF5bUJVT0lESUU/edit?usp=sharing
And the wireshark capture file can be found here: https://drive.google.com/file/d/0BwxF_9SAkKzLTGpSS0ktZW1xV28/edit?usp=sharing
And the printer configuration listing: https://docs.google.com/document/d/1zh1Tw4D4yNa2uljOIL1kO2z8se9HK859irpUEwyxlyY/edit?usp=sharing
I've started a discussion with Zebra Tech Support, and they're working on it, but I thought I'd toss it out here for more ideas since we're getting kind of stumped.
Any ideas why this may be happening?
