24

This is a strange problem: I dual boot Win7 (sda2) and Ubuntu (sda3) and wanted to use the FAT32 partition to share files across two OS' with the following partition table

Device      Boot    Start       End      Blocks     Id  System
/dev/sda1   *           1          13      102400    7  HPFS/NTFS
  Partition 1 does not end on cylinder boundary.
/dev/sda2              13        5737    45978624    7  HPFS/NTFS
/dev/sda3            5738       10600    39062047+  83  Linux
/dev/sda4           10601       19457    71143852+   5  Extended
/dev/sda5           10601       11208     4883728+  82  Linux swap / Solaris
/dev/sda6           11209       15033    30720000    b  W95 FAT32
/dev/sda7           15033       19457    35537920    7  HPFS/NTFS
  1. I followed a tutorial, issuing: 
    sudo mkdir /media/FAT32
sudo chmod 777 /media/FAT32
sudo mount /dev/sda6/ /media/FAT32
  2. After I mounted /dev/sda6, I can only read but am unable to write to it.
    • I checked the directory permissions, which are drwxr-xr-x, but after I unmounted it, it becomes drwxrwxrwx and I can read and write to it.

I don't know where I've went wrong.

JW0914
  • 9,096
Dean
  • 400

11 Answers11

27

Try mounting with rw and specify the type:

mount -t vfat /dev/sda6 /media/FAT32 -o rw,uid=xxx,gid=xxx

where uid and gid are that of your user account.

3

It's important to repair/check the disk in Windows before using it on Linux, as, by default, FAT/NTFS drivers disable write if they find errors on the disk:

  1. Windows: 
    Chkdsk D: /f
  2. Linux: 
    sudo mount -t vfat /dev/sdc1 /media/FAT32 -o rw,uid=$(id -u),gid=$(id -g)
JW0914
  • 9,096
intika
  • 1,383
2

If you simply forget about command line and mount with Nautilus, it should set it as you want.

From the terminal, the permissions of the folder before mounting doesn't matter. It's the mount options that count. Try:

mount -t vfat /dev/sda6 /media/FAT32 -o rw,uid=xxx,gid=xxx,umask=133,dmask=022

This will set files to rw-r--r-- and folders to rwxr-xr-x.

If you want other user/group and permissions, for instance to copy files from fat32 to the ext4 partition with the desired attributes, better consult the mount manpage. Roughly you put on umask the opposite of what you would put on chmod.

user39559
  • 2,016
2

For FAT filesystems, read/write availability is governed by the mount options.

Consult the manpage for mount and read about uid and gid mount options for FAT.

geek
  • 10,674
2

Have you tried writing to the files with a sudo command? That should work with your current setup.

To get file writes for your normal user working, you need to use the uid and gid options to mount, to set the owner of files on the partition to your current userID. You probably also want either umask or dmask and fmask options.

Your mount command would look like this:

sudo mount -t vfat /dev/sda6 /media/FAT32 -o uid=1000,gid=1000,umask=022
# assuming your user's UID is 1000, GID is 1000
# umask=022 sets permission mode 755 for all files on the partition
quack quixote
  • 43,504
1

I had exactly the same problem and the only thing that actually worked is:

sudo mount -t vfat  /dev/sda6 /media/FAT32 -o rw,umask=0000

See also that answer

Community
  • 1
lauhub
  • 177
0

Without manually mounting, a fstab line does the trick:

UUID=1DD9-0D44 /media/exthd/TERABYTE_G  vfat      rw,noatime,uid=1000,gid=1000,user   0 0
  • uid,gid are of your user; /media/exthd/TERABYTE_G must be pre-created
  • If mount -a isn't applying properly to the new fstab line, reboot to resolve
JW0914
  • 9,096
Angelo Dureghello
  • 140
0

You have the wrong order on the commands you want:

sudo mkdir /media/FAT32
sudo mount /dev/sda6 /media/FAT32
sudo chmod 777 /media/FAT32

What is happening is that /media/FAT32 represents different directories before and after the mount. Before it's the directory you made, and which you chmod'ed 777. After, it's the root directory of the filesystem in /dev/sda6.

jneves
  • 307
  • 1
  • 4
0

Another option:

sudo mkdir /media/FAT32
sudo mount /dev/sda6 /media/FAT32 -t vfat -o rw
sebasto
  • 1
  • 1
0

This worked for me.

  • Disks → Select the FAT32 Partition → Edit Mount Options
  • Add these two dmask=000 fmask=111
  • Check the image for reference:image link
NavaneethPK
  • 1
  • 2
-1

Sometimes I lose the Windows disk from Linux and I solve using mount -o force:

sudo mount -t ntfs-3g /dev/sda1 /media/win -o force
JW0914
  • 9,096