1

I am looking for a hardware, which must run about 256 computationally intensive real-time concurrent tasks in 24 hour mode. Each task takes about 40-50 MFLOPs, so all tasks require about 10 GFLOPs. CPU-RAM speed is insignificant. All tasks must be managed by a Linux Kernel (32 bit, with SMP).

I am looking for a one-mainboard solution with one multi-core CPU (if such CPU exist). If such CPU doesn't exist, then I need one multi-socket mainboard solution (with multiple CPUs).

Can you please recommend me any professional CPU/Mainboard solution which will satisfy such requirements? It is also very important that there are no issues with Linux Kernel (2.6.25). I also would prefer Intel architecture and well-proved stability. I still have doubts that it is feasible at all.

Hennes
  • 65,804
  • 7
  • 115
  • 169
psihodelia
  • 935

1 Answers1

2

Well you can get single socket, multi-core until the cows come home. I have a quad core for my home desktop (4x3.0ghz). They are common, and reasonably cheap.

Whether that will meet your compatibility needs is a whole different story. I've installed Fedora 11 (Kernel 2.6.29.4) on dual quad-core Xeon machines, more than once, without any major difficulties (and the ones I had were raid based, not processor based). I've got Fedora 12 on my laptop (which meets your requirements, even though it's only got 2 cores.) I don't think you'll have processor problems.

As for 10 gigaflops, that's no problem...Almost all modern intel desktop processors are capable of at least that.

Satanicpuppy
  • 7,205