31

I have see a lot of people asking this question and getting answers that supposedly worked. NOTHING I have found works for me.

I have a default Dell monitor that came with my Dell XPS 1700. It has Windows 7.

I recently got a great deal on a touch monitor for only $10. When I connect it to my computer, the touches go to the Dell monitor instead of the Planar touch monitor.

Here comes the problem:

When I go to control panel, tablet pc settings, setup, and try to complete it, I try to touch the touch monitor after hitting enter for the Dell monitor. NOTHING HAPPENS. The mouse clicks the main non touch monitor instead of the touch so i cant actually set the touch screen as the touch. I try clicking the correct monitor with my mouse. STILL nothing happens. I am really confused here and I really want to get this monitor to work.

Any answers are greatly appreciated.

Emanuel Elliott
  • 438

5 Answers5

44

Windows 10 / 11

  1. Go to Windows Settings (WinKey and search "Settings") and search for "calibrate the screen for pen or touch input"
  2. or: Run -> "control /name Microsoft.TabletPCSettings"
  3. Click the "Setup..." button
  4. Click Enter until you see the message on the screen you want
ZivS
  • 551
19

Windows 7 is capable of this as long as the final step doesn't confuse you in what someone else already answered. I will try to explain the last step a little clearer.

  1. Press the Windows Key and type then click "Tablet PC Settings" listed under Control Panel.

  2. Click "Setup..."

  3. Keep pressing Enter until the text is written on the Touchscreen, then touch it!

Windows will then know what input (Touch) device is associated to which screen. :-)

Run5k
  • 16,463
  • 24
  • 53
  • 67
Superfly1980
  • 191
8

Can you list what you've tried?

Windows 7

My first port of call would be display settings: Control Panel -> Settings -> Display -> Screen Resolution - set the the touchscreen monitor you wish to use as your Primary display.

Unfortunately in Windows 7 in a dual monitor setup, from experience, your touch screen will have to be the Primary display.

Windows 8; if you have both a touchscreen and non-touchscreen monitor connected to your PC, you might need to change settings for your cursor.

Swipe in from the right edge of the screen, tap Search (or if you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search), enter Tablet PC Settings, and then tap or click Tablet PC Settings.

Tap or click Setup. Administrator permission required You might be asked for an admin password or to confirm your choice.

If you’re given a choice, tap or click Touch Input, and follow the on-screen instructions.

Hope this helps :)

A Schmilli
  • 104
8

You are right there. I was frustrated with the same problem. Go to Control Panel/Tablet PC Settings. Click Setup. Hit enter to get to the screen you want. It will be the one with the message on it. Here is the problem, when you touch the screen, it will still select the main screen. So instead of touching the monitor you want, keep sliding you finger over the monitor to move the mouse. Keep doing it until the hand appears on the touchscreen monitor. Then tap the screen to complete the selection. The correct monitor will now be selected.

Steven H
  • 81
4

This is what worked for me:

  1. Go to Control Panel and search for "Touch".
  2. Click "Tablet PC Settings"
  3. Click "Setup..." to the right of "Configure your pen and touch displays"
  4. Choose "Touch Input..."
  5. Hit the "Enter" key until you see the instructions appear on your actual touch monitor. Touch the screen and it will say something like "Hit enter to move to the next step".

Actually found my answer here.

Don Smith
  • 91