0

Recently I've upgraded to windows 10 and facing a problem with connecting to my workplace cisco vpn. Cisco vpn client refused to work. So I opted to install shrew soft vpn client. It says tunnel enabled but then no traffic seems to pass. I can't ping or do RDP or ssh to the necessary servers. Can anyone be of any assistance? Thanks in advance.

Some logs:
config loaded for site 'IP'
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
ipcomp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
network device configured
tunnel enabled
chilli10
  • 11

1 Answers1

-1

I had the same problem more often now. In my case reboot solves the issue.

When I go to Network tab and find the counter "Established - 0" I know I need to reboot :(

note I'm using v2.1.7

Nemo
  • 1