Questions tagged [google-wifi]

16 questions
6
votes
1 answer

How do I get my modem's IP address when using Google Wi-Fi?

Occasionally I need to connect my ISP's modem directly to initiate a restart. Normally when I connect to my modem directly, I can either connect to the modem using the vanity URL provided by the ISP, or I can figure out the modem's IP address, and…
Senseful
  • 4,400
3
votes
0 answers

Devices don’t automatically reconnect to nearest Google Nest Wifi point

I’ve got a home Google Wifi network comprising: 1 Nest router, 1 Nest Wifi point, and 2 Google Wifi points. These are all compatible. The Google Wifi app shows the mesh network is healthy. But I’ve noticed that connected devices frequently show only…
callum
  • 2,115
2
votes
0 answers

How does Google WiFi device speed test work?

I was recently using the device speed test functionality on Google Wifi (https://support.google.com/wifi/answer/7578264) and it got me wondering how this works. Ping works to arbitrary devices because they respond to ICMP, but how does a speed test…
Ari
  • 121
1
vote
1 answer

Can you bridge a basic mesh wifi (e.g. google wifi) system with a separate wireless bridge?

I currently have one house with a mesh Wi-Fi system (Google Wi-Fi). I am adding a back-house that is too far to reach with just mesh access points alone. I would like to maintain the Google Wi-Fi setup in the primary house as it. Ideally I would…
0
votes
0 answers

Google nest 6e pro port forwarding failure

I have had a Google mesh for the last 8 years and everything have been working fine, until this week when I decided to upgrade to a nest wifi 6e pro. I have a Modem (Inteno broadband, XG6749, not possible to log into etc.) that provide the broadband…
axel_ande
  • 121
0
votes
1 answer

How do I access the "permanent" IPv6 address?

In Windows 11 (same as 10 I think), the command ipconfig gives something like this Connection-specific DNS Suffix . : lan IPv6 Address. . . . . . . . . . . : ...:5c69 Temporary IPv6 Address. . . . . . : ...:d046 Link-local IPv6 Address…
0
votes
1 answer

WLAN speed very slow (10 Mbps) when 850 Mbps in same location on other devices

this is my first post - so I hope I'm asking correctly and in the right location with appropriate tags. I've done a ton of troubleshooting and can't crack this after probably 50 hours. I give up, please help me! PC Set-up: Windows 10 Pro |…
0
votes
1 answer

Computer connecting to wrong Google wifi router

I have Google Wifi with 2 routers. My work computer is right next my personal computer. My work computer shows me: netsh wlan show interfaces There is 1 interface on the system: Name : Wi-Fi Description :…
Eric
  • 1,343
0
votes
0 answers

Can you connect other routers to Google Nest Wifi and have them extend the network similar to a mesh config?

tl;dr: Can another wifi router be used to extend GoogleNest? (e.g. via Ethernet cable). Could it behave as a mesh? (aka use same network id and have devices easily hop between acces points) If yes, what are the drawbacks to just getting the Google…
0
votes
0 answers

integrate mesh system in existing wired network

I have a wired network built around a wifi router. I was wondering how I could integrate a wifi mesh into this configuration. I need to bring wifi to more rooms in the house and I thought of using a mesh system instead of a repeater.
0
votes
0 answers

Issues with network stability

I can't seem to manage to sort out my home network issues. I have a setup that looks like this: So I have a router that is set up to just be a bridge, and DHCP and everything is disabled on it. It is connected to a Google WiFi that is set to work…
0
votes
1 answer

Windows 10 WiFi only working with low MTU

Got a mystifying issue with my WiFi. It suddenly stopped working and after much trial and error I got it work by lowering the MTU to 316. netsh interface ipv4 set subinterface "Wi-Fi" mtu=316 Anything higher than that just hangs and end up with a…
Aya
  • 13
0
votes
1 answer

How to resolve VLAN tagging issues with Google Nest WiFi router

I am a software engineer and have some training and experience with TCP/IP networks, but not enough to figure out this intractable issue that appears to be caused by my choice of router colliding with my choice of broadband provider. My home network…
Ollie C
  • 143
0
votes
1 answer

Home network cable differences

I'm trying to extend my home network to a second building close to my house. I've run a cat6 cable from my router (Google Wifi) to the second building, and when I jack it into my laptop everything seems fine - good ping & bandwith, no (apparent)…
0
votes
0 answers

Google Wifi + PiHole: Redirecting DNS requests

Current setup involves 3 mesh google wifi devices + 1 Raspberry PI 1 B model running pihole. Most of the time it runs fines as it is, but I've noticed some devices (i.e. Chromebooks, chromecasts, etc) skip the dns configured in google wifi and go to…
AlvaroFG
  • 101
1
2