4

I am connecting to a VPN Server set up following instructions in https://github.com/hwdsl2/setup-ipsec-vpn

And I setup the clients following https://github.com/hwdsl2/setup-ipsec-vpn/blob/master/docs/clients.md#os-x

Under the same LAN, one of my client(OSX 10.14.5, firewall off) connected successfully

# Contents of `cat /var/log/ppp.log`
Tue Jun 11 14:46:46 2019 : publish_entry SCDSet() failed: Success!
Tue Jun 11 14:46:46 2019 : publish_entry SCDSet() failed: Success!
Tue Jun 11 14:46:46 2019 : l2tp_get_router_address
Tue Jun 11 14:46:46 2019 : l2tp_get_router_address 192.168.3.1 from dict 1
Tue Jun 11 14:46:46 2019 : L2TP connecting to server ‘xxx.xxx.xxx.xxx’ (xxx.xxx.xxx.xxx)...
Tue Jun 11 14:46:46 2019 : IPSec connection started
Tue Jun 11 14:46:46 2019 : IPSec phase 1 client started
Tue Jun 11 14:46:47 2019 : IPSec phase 1 server replied
Tue Jun 11 14:46:47 2019 : IPSec phase 2 started
Tue Jun 11 14:46:48 2019 : IPSec phase 2 established
Tue Jun 11 14:46:48 2019 : IPSec connection established
Tue Jun 11 14:46:48 2019 : L2TP sent SCCRQ
Tue Jun 11 14:46:48 2019 : L2TP received SCCRP
Tue Jun 11 14:46:48 2019 : L2TP sent SCCCN
Tue Jun 11 14:46:48 2019 : L2TP sent ICRQ
Tue Jun 11 14:46:48 2019 : L2TP received ICRP
Tue Jun 11 14:46:48 2019 : L2TP sent ICCN
Tue Jun 11 14:46:48 2019 : L2TP connection established.
Tue Jun 11 14:46:48 2019 : L2TP set port-mapping for en0, interface: 8, protocol: 0, privatePort: 0

But the other client(also OSX 10.14.5, firewall off) failed to connect 

# Contents of `cat /var/log/ppp.log`
Tue Jun 11 14:44:04 2019 : publish_entry SCDSet() failed: Success!
Tue Jun 11 14:44:04 2019 : publish_entry SCDSet() failed: Success!
Tue Jun 11 14:44:04 2019 : l2tp_get_router_address
Tue Jun 11 14:44:04 2019 : l2tp_get_router_address 192.168.3.1 from dict 1
Tue Jun 11 14:44:04 2019 : L2TP connecting to server 'xxx.xxx.xxx.xxx' (xxx.xxx.xxx.xxx)...
Tue Jun 11 14:44:04 2019 : L2TP sent SCCRQ
Tue Jun 11 14:44:24 2019 : L2TP cannot connect to the server

Can somebody gives me a hint?

addlistener
  • 141

1 Answers1

0

Navigate to /etc/ppp.
If there is any file, like options, check it out.
There might be:

/etc/ppp % cat options
plugin L2TP.ppp
l2tpnoipsec

So you should remove the options file and then you will get a positive result.

zx485
  • 2,337
Mike
  • 1