I have a 17 inch LCD, with a maximum resolution of 1280x720. It works fine, but there are some apps that require 1024x768. I know that the maximum resolution is called like that for a reason, but is there no way of increasing the resolution, other than getting a bigger monitor?
Asked
Active
Viewed 1.3e+01k times
10 Answers
15
You could use a virtual desktop; this would allow you to scroll around to support more virtual resolution. But apart from that, no. Your LCD has a maximum resolution. By definition, that means it cannot support a higher resolution.
ChrisInEdmonton
- 8,796
13
Both AMD and NVIDIA have Virtual Super Resolution (or Dynamic Super Resolution) configurations now in the latest drivers.
With AMD it should be pretty apparent in the Crimson driver.
Radeon Settings > Display > Virtual Super Resolution
As for NVIDIA, it's in the control panel:
Status3543
- 3,461
2
One of my Windows hacks is to try unchecking hide resolution that monitor can't display. I've tried to do that on my 18" Lenovo 1600x900 resolution and doing that, it showed selections for 1776x1000 and 1920x1080 resolutions. When I clicked those, however, things started looking a bit awkward.
This hack can have side effects, though. Things could start looking like a tunnel, or get distorted, compressed or stretched due to applying the wrong aspect ratio. The worst thing of this hack, I've seen, is that letters which used to be black can appear light grey, and then black screens keep flashing as there is a low refresh rate. Every day I used it, refresh rates kept dropping until it stopped at 15 Hz, the lowest refresh rate for a CRT.
A good way I found to avoid that is to use GiMeSpace. This is an example of a virtual desktop, as described in the accepted answer. GiMeSpace is a commercial product (under $20, with a free trial to see if it will work for you). It gives you a scrollable window onto a larger virtual screen. This product also has a zoom-out mode that lets you see the entire virtual screen (although interpolated to fit on the actual screen, so some detail is lost).
2
Many monitors support many resolutions. If your monitor is capable of doing that resolution, then you might be able to get it to scale up a bit. But as far as exceeding a maximum resolution, the answer is usually no. The hardware generally lacks the ability to sync to a resolution that is not supported.
Axxmasterr
- 7,966
1
If you're using Windows you may want to check the text scaling !
You can configure this for each display individually. And it's worth noting that windows sometimes puts this at 150% by default.
It changes:
- the height of the task bar
- the sizes of the windows
- because everything is bigger, it looks like the resolution is smaller.
So, while this isn't a way to increase the resolution. You may actually not even need to increase the resolution. It could just be the scaling that's configured incorrectly.
bvdb
- 181
0
It's not the size of your monitor that determines its maximum resolution, but the technology built into it. I would recommend finding the latest drivers and utilities for your existing video card, which may have desktop stretching or other capabilities. If that doesn't help, you'll need to get a new card and/or monitor.
sangretu
- 742
0
It sounds like you have a widescreen monitor, given that aspect ratio. 1024x768 is an old school 4:3 resolution (give or take).
Desktop scaling is annoying and will never look quite right.
The BEST thing to do is to buy a new LCD (most new LCDs are widescreen), 19" and above. Almost all should have a resolution larger than 1024x768.
The most cost effective solution (especially if your PC supports multiple monitors) is to buy a used 17" or 15" fullscreen 4:3 ratio LCD - those will do the resolution you need, and it would be neat to have a second monitor on your system. A used 15" LCD is dirt cheap nowadays.
NoCarrier
- 3,517
0
If you are looking for an possibility to show simply more Programs virtual desktop_s_ are the solution.
For Windows XP there is a PowerToy allowing different Desktops which could be populated with different Program Windows. I would be surprised if there is no solution for other windows versions. In Linux this is pretty standard. You could switch between the Desktops by an hotkey which is pretty convenient. I would say this is the best solution i know about.
Darokthar
- 1,501
0
I would suggest you look for an 'upgrade' to that particular program, or an alternate program that does the same thing at the resolution of any monitor. Virtual desktop solutions eat up your resources and slow down your machine, and there's also a possibility of incompatibility with other software. The best solution would be to get a second monitor -- an old 4:3 at that lower res should be about $10. If you don't have a dual-monitor capable video card, then you're using something pretty antiquated and you should invest in a newer video card. That will improve your system's overall performance graphics-wise, which essentially means system-wise because Windows is a GUI environment and there's a lot of focus by the system on the graphics involved in displaying Windows, moving them around, etc. Therefore, even if you decide to stay with the multi-res, virtual desktop solution, you'll have improved performance. Your games will perform better also -- always a plus!
user98721
- 29
