3

On just one computer in my household, I cannot complete a successful traceroute nor browse in any browser to a seemingly random-selected, small set of websites. This includes sites like twitter.com to my own site, thislooksnice.com, and have yet to find a rhyme or reason. However, I'm able to ping and get a response from them just fine. On my iPod Touch and other computers, I can browse to the sites just fine.

I'm on a Mac running 10.6.7. I can't think of anything I've changed lately that has anything to do with my DNS/network settings. I normally use OpenDNS. I tried disabling it at the chance using my ISPs default DNS servers would fix things, but alas, it did not.

At a total loss at this point since this is a tough one to Google. Any thoughts?

UPDATE: The error I get when trying to traceroute is as follows:

kevin-macbook-pro:~ Kevin$ traceroute twitter.com
traceroute: Warning: twitter.com has multiple addresses; using 199.59.148.11
traceroute to twitter.com (199.59.148.11), 64 hops max, 52 byte packets
traceroute: sendto: No route to host
 1 traceroute: wrote twitter.com 52 chars, ret=-1
Daniel Beck
  • 111,893
Kevin
  • 41

7 Answers7

1

Problem solved! It looks like one of my login items was interfering. I cleared out several applications that I didn't really need to have load at startup, and the issue seems to have cleared up since. Unfortunately, I don't know which application was interfering, and I'm not sure I'll take the time to go back and pinpoint it anytime soon. Have already poured too much time into this. Thanks though to harrymc, mehaase, and Spiff for your help!

Kevin
  • 41
1

PeerGuardian installs itself as a service, so even if the GUI is not running, it still is active and may block some sites.

Alex Skrypnyk
  • 111
0

You might try to flush the DNS cache on the problematic computer.

To flush the DNS cache in Mac OS X Leopard, type in your terminal :

lookupd -flushcache
harrymc
  • 498,455
0

Ping and http use different protocols, which might explain why one works and the other doesn't. Then again, traceroute uses the same protocol as ping, so I have to say I am totally stumped. Traceroute isn't great for troubleshooting because a lot of big routers between you and your destination won't respond to it, so you just get those * * * responses.

Your DNS is okay. I just looked up twitter.com and found addresses in the same range, so it's not a name problem.

The problem is in your routing configuration. One thing I noticed is that you can't reach posterous.com (184.106.20.99) or thislooksnice.com (184.106.171.127) which both have the same prefix (184.106.*)

Try running "netstat -rn" and posting the output here.

Mark E. Haase
  • 4,893
0

Some tools in Mac OS X — especially traditional Unix command-line tools — use traditional Unix DNS resolver libraries. Other tools — mainly GUI apps, but some command-line tools too — use library calls that are now routed through mDNSResponder.

Most times DNS seems to work in some places but not in others in Mac OS X, the fault lies with mDNSResponder.

I used to just sudo killall -HUP mDNSResponder, but I've found this isn't always sufficient anymore. Now I...

sudo killall -9 mDNSResponder

...and let launchd relaunch it.

Spiff
  • 110,156
0

The program that was causing this problem is called PeerGuardian. It comes with an uninstaller. If you run the uninstaller, than the problem will go away. You may have to reboot.

user73636
  • 1
0

I can confirm that in my case the cause of it all was peerguardian on a Mac. Tried solutionto add the non-resolving address range to a custom list but the application is not working properly (at least on mac) as it would allow a site corresponding to an ip and strangely continue to block subdomains of the same domain/ip. For instance if adding the IP for www.sitetobeallowed.com then that would resolve fine once added, but any subdomain such as subdomain.sitetobeallowed.com will not resolve and report a blank page/error.

I had to install PeerGuardiand and call it the day as I've tried to fix to no avail to be able to continue using the app, but that turned into a losing proposition because I'd have to add too many blocked sites to a custom allow list. Too bad, but at least I will no longer be nuts trying to find WTH is going on and why sites are not resolving.

Hope that helps some of you with the same issue and thanks to user73636 whose tip led me to the solution! Much appreciated :)

user1726228
  • 1