Super User
Super User

Questions tagged [draytek]

25 questions
4
votes
3 answers

How to see DHCP assignments in Draytek Vigor 2920 router

Web interface looks chaotic for me. Where can I see a list of computers, which had received IP addresses by DHCP?
Dims
  • 13,414
4
votes
1 answer

Why is it that 2.4 GHz Wi-Fi is not visible/working on channel 1 to 4 on my Draytek Vigor 2860n+ router?

Over the past few weeks, my Wi-Fi signal has been getting progressively worse, to the point standing right next to the router (Draytek Vigor 2860n+) shows no SSID. I've now discovered that if I select any channel other than 1 to 4 (channel options…
Snipzwolf
  • 378
3
votes
1 answer

Regular 30 second WiFi dropout from a DrayTek 2926n router

For some months now the WiFi connection to my DrayTek 2926n Router has been awful. Although once-upon-a-time it was OK. The problem is something to do with the router, as multiple clients exhibit the same problem. And this is just WiFi; wired…
P Burke
  • 141
2
votes
1 answer

Draytek firewall rule isolate IP

I'm using a draytek 2866 router, and am trying to create a firewall rule so that 192.168.1.8 cannot access any other devices on the network except the gateway 192.168.1.1. However unsure if draytek firewall is just non functional, or if this is a…
user3407675
  • 29
2
votes
2 answers

Unable to reach self domain name from inside LAN network

It seems that this question is very similar to I suddenly can’t access my own web server within my LAN via the external WAN IP address but nothing there helped me so I'm trying again. I have a router with WAN address 1.2.3.4 and local network…
fracz
  • 111
  • 2
  • 13
2
votes
2 answers

How can I configure the DDNS update client in my Draytek router to work with Google Domains?

I have a Draytek router that has a built-in dynamic DNS update client (I have a 2860 series, although many current models support this). I also have a domain name registered through Google Domains, and I am using Google's name servers. Google's…
DaveRandom
  • 219
  • 2
  • 13
1
vote
1 answer

Vigor 2920 cannot reach linux LAN device from VPN or WAN after some time (timeout?)

Setup: Gateway: Vigor 2920, Firmware: 3.3.6.1, 2 fiberlines, loadbalancing. I have 2 XEN Citrix server with virtual Debian (DomU) running on the LAN. (PROBLEM) Other devices running on the LAN: Windows PC, NAS etc. (Not having any problem) PPTP VPN…
Oyba
  • 11
1
vote
1 answer

DrayTek 2820n: LAN to LAN VPN connected, but half working

We have two locations, both using a DrayTek 2820n. Location 1 (L1) features a PDC, DNS, DHCP server (SBS 2008) with IP 10.1.1.2. Location 2 (L2) has a Windows 7 laptop only. Both locations are connected via a LAN to LAN VPN profile. L1 is set to…
Reado
  • 471
1
vote
1 answer

VPN for remote access to home LAN (IPSec?)

Another probably daft question: I am in the process of setting up a VPN connection for the purpose of remote access to services on my home LAN. The router, firewall and VPN server i am using for this is a Draytek Vigor 2865. My biggest problem here…
M_D
  • 582
1
vote
1 answer

What does this 'AP-assisted Roaming' setting mean on Draytek VigorAP 903?

I've recently bought some wireless access points from Draytek. I understand what most of the settings do but I'm trying to fine-tune the roaming behaviour and there's one setting which my colleagues and I can't make sense of. In the AP-assisted…
Vilāsamuni
  • 13
1
vote
0 answers

OpenVPN client behind CGNAT, traffic only passing server to client

I have a Draytek Vigor 2927ax router with built-in OpenVPN server at my main site on a static IPv4. I'm trying to establish a VPN tunnel from a remote site using the OpenVPN client built in to an Asus AX11000 router; Internet access is via a…
poppadum
  • 11
1
vote
0 answers

Why does my firewall block outgoing TCP/UDP port 137 ~ 139 + 53 ~ undefined

I've got a Draytek Vigor 2930 router which has a default xNetBios -> DNS which blocks "TCP/UDP, Port: from 137~139 to 53~undefined". What is this rule, and what is its purpose?
sbrattla
  • 151
0
votes
1 answer

Connect router to VPN

I would like to connect my router to VPN in such a way, that would allow any house device to connect to router and be automatically routed through VPN. This is quite different setup from usual dial-in connections I can find on the net. I would like…
Chriser
  • 3
0
votes
1 answer

DrayTek 2820 configuration using public IP addresses

I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the…
Kev
  • 2,339
0
votes
1 answer

Why is MS-CHAP authentication failing connecting to Draytek L2TP/IPSec VPN from Linux?

I'm attempting to connect to an L2TP/IPSec VPN provided by a Draytek router from a headless Ubuntu Linux AWS EC2 instance. This is a headless server, so I am setting it up manually (rather than using network manager). I'm using strongswan for the…
crobar
  • 302
1
2