Super User
Super User

Questions tagged [hp-proliant]

The ProLiant brand is used for some of HP and Compaq servers.

75 questions
8
votes
4 answers

My UPS has a 5ms switchover time, server shuts off during said time

Is there anything I can do to prevent the server from shutting down? (bios setting etc). the server in question is an HP Proliant ML350 G6. I've got an eaton 5110 UPS and Eaton claims that we need to buy any model beginning with a 9 (and thats close…
TehBanz
  • 93
8
votes
2 answers

Do servers have extra safety precautions compared to consumer computers?

I'm sure it would have a protocol for overheating, simply by shutting down, but would a server have a protocol for failing parts? For example, failing fans, or damaged power supply?
Javontae
  • 119
5
votes
1 answer

Hp N54L Proliant microserver network driver (Windows 10)

Hoping someone can shed some light on an issue i am having after the Windows 10 upgrade. Everything on my HTPC is running 100% apart from the network (Ethernet) , wifi works fine via a dongle however i have run this cabled previously for streaming…
Darren
  • 51
4
votes
3 answers

HP Smart Storage Administrator CLI hpssacli "Error: No controllers detected." on Ubuntu Server 14.04.1

I've successfully installed Ubuntu Server 14.04.1 LTS on the HP Microserver ProLiant Gen8. Before installing, I booted into the Intelligent Provisioning and set up a RAID 1 with two disks. During installation, I had to inject HP Dynamic Smart Array…
bastian
  • 43
3
votes
3 answers

is it possible to schedule automatic power on of server "hp dl360p gen8"?

I do not use server at night so I want to turn it on at 9.00 a.m. and turn off at 11.00 p.m. Turning off is trivial I can just schedule corresponding task in OS. On my old home computer I was using special option in BIOS which allows to schedule…
Oleg Vazhnev
  • 853
3
votes
3 answers

How to get ILO management IP and Mac address

I am looking for a way to find the IP address of the HP Proliant server ilo. I have searched a lot, but no luck. there are way to reboot and get into the bios for getting it. But i cant reboot the production server. From the Linux server there are…
AReddy
  • 193
3
votes
1 answer

Can someone advise on DL380 G5 RAM, what is the difference between these DIMMs?

I have 3x DL380 G5 servers that were second hand retired ones. One of the servers, I populated with 4x 4GB DIMMs, and 4x 1GB DIMMs. Everything was working away merrily, and I decided to purchase some more 4GB DIMMs for one of the other servers. I…
Eds
  • 427
2
votes
0 answers

Windows not finding HP Smart Array P410? (Windows 7 Ultimate, Server 2012, 2012 R2) HP EliteDesk 800 G1 SFF

Windows not finding HP Smart Array P410? (Windows 7 Ultimate, Server 2012, 2012 R2) HP EliteDesk 800 G1 SFF I have got myself an HP EliteDesk 800 G1 SFF (i5-4590 @ 3.3GHz, 8GB RAM) to use as a home server and i have installed a RAID card (HP Smart…
Wool
  • 68
2
votes
3 answers

Can I replace my 4U server PSU with a desktop PSU?

I have an HP ML10 v2. It uses a Delta DPS-350AB-20 A 350w mATX PSU. I use this server at home, and the PSU is noisy, so I'm looking to replace it with a Be Quiet! SP10 CM 500w, which is quieter, more efficient and more powerful (I'll eventually be…
StringsOnFire
  • 131
2
votes
1 answer

can't use HP STK after installing

I've downloaded HP STK from here http://www.hp.com/go/ProLiant/STK I've tried to save the copy of my settings using such command, but got error: C:\SWSetup\SP56837\x64\tools>hprcu.exe -a -s -f hprcu_settings.xml HPRCU Version 1.00 - HP ROM…
Oleg Vazhnev
  • 853
2
votes
3 answers

Creating a dynamic lacp trunk from HP Procurve 2412zl to Proliant DL380 G7

I'm configuring an IEEE 802.3ad (LACP) dynamic trunk from a HP Procurve 2412zl (firmware version K.15.07) switch to a HP Proliant DL380 G7 server. The DL380 has 4 NICs and is running Win2008 R2, so I'm teaming the NICs together and leaving…
Maalobs
  • 21
2
votes
1 answer

Running DaVinci on an HP Proliant server without OpenGL or CUDA GPU

I have an old HP ProLiant server running Windows 10 where I would like to install and run DaVinci Resolve. I install the latest version, 18, and see CRITICAL_QUIT: GPU initialization failed could not initialize OpenGL Following these tips, I…
ginjaemocoes
  • 2,151
2
votes
0 answers

HP Proliant Microserver Gen 8 Unable to see array as disk drive

I'm a bit new to server ownership, but in no means new to IT. I recently got an old microserver from my job, with a copy of Windows Server 2012 R2 and wanted to set it up for NAS or something similar for file sharing/storage/backup. I currently have…
user1682255
2
votes
2 answers

How to fix nonresponsive iLO 2 on an aftermarket DL 380 G6?

I recently purchased an HP DL380 G6 for homelab-esque usage, and I've found a few issues that I think are all caused by a nonresponsive iLO 2: POST takes several (e.g. 5) minutes, longer than would be expected. On POST, after the splash screen, it…
Pneumaticat
  • 121
2
votes
2 answers

HPE Prlliant DL380 G9 mv system from HBA mode to smart Array mode

I have a functional test system on a Proliant DL380 G9. The DL380 is currently in HBA mode, meaning HDD connected to it will bypass the internal smart Array P840. I would like to test this system using the internal P840, but i do not want to…
Fawzi Masri
  • 83
1
2 3 4 5